Users Guide

Table 22. Network traffic types - QoS settings (continued)
Network Traffic Type Description QoS Setting
Storage - FCoE Used for FCoE VLANs 5
Storage - Data Replication Used for VLANssupporting storage data
replication such as for VMware VSAN
5
VM Migration Used for VLANs supporting vMotion and
similar technologies
5
VMWare FT Logging Used for VLANs supporting VMware
Fault Tolerance
5
Defining networks
To configure a logical network:
1. Click Configuration > Networks.
The Networks page is displayed.
2. Click Define.
The Define Network window is displayed.
3. Enter the name, description, VLAN ID.
The format for a single VLAN ID is—123 while for an ID range, the format is—123-234.
4. Select the Network Type.
For more details, see SmartFabric VLAN management and automated QoSThe available options are:
● General Purpose (Bronze)
● General Purpose (Silver)
● General Purpose (Gold)
● General Purpose (Platinum)
● Cluster Interconnect
● Hypervisor Management
● Storage - iSCSI
● Storage - FCoE
● Storage - Data Replication
● VM Migration
● VMWare FT Logging
For more details, see SmartFabric VLAN management and automated QoS.
Editing networks
To edit a network:
1. On the Networks page, select the network that you want to edit, and click Edit.
The Edit Network window is displayed.
2. Make the required changes.
While editing the network, ensure that only one VLAN is configured in both the ports.
NOTE: In fabric mode, do not delete VLAN from OME–Modular, if the VLAN is associated with any uplink.
Exporting network configurations
To export the network configuration:
On the Networks page, select the desired network and click Export.
The network details are exported in a .csv format to a local drive on your system.
Managing networks
89