Users Guide

NOTE: See Dell EMC Enterprise operating systems support for information on the operating systems supported by specific
servers.
● Microsoft
○ Windows Server 2019
○ Windows Server 2016
○ Windows Server 2012 R2
NOTE: The Windows Server 2012 R2 operating system is not supported on AMD platforms.
● Linux
○ Red Hat Enterprise Linux 7.3 and above
○
SUSE Linux Enterprise Server version 12 SP2 and above
NOTE: The S140 supports Linux only for pre-booting the configuration utility capability for enabling the Linux
MDRAID. For more information, see Linux RAID.
NOTE: For a list of supported operating systems and for driver installation instructions, see your system documentation at
https://www.dell.com/operatingsystemmanuals.For specific operating system service pack requirements, see
www.dell.com/support/drivers.
Supported PowerEdge systems
The following PowerEdge systems support the S140 controller:
● PowerEdge C6400
● PowerEdge C6420
● PowerEdge C4140
● PowerEdge FC640
● PowerEdge M640
● PowerEdge MX7000
● PowerEdge MX740c
● PowerEdge MX840c
● PowerEdge R240
● PowerEdge R340
● PowerEdge R440
● PowerEdge R540
● PowerEdge R640
● PowerEdge R740
● PowerEdge R740xd
● PowerEdge R740xd2
● PowerEdge R840
● PowerEdge R940
● PowerEdge R940xa
● PowerEdge R6415
● PowerEdge R7425
● PowerEdge R7415
● PowerEdge T140
● PowerEdge T340
● PowerEdge T440
● PowerEdge T640
● PowerEdge XE2420
Supported physical disks
The PERC S140 controller supports the following physical disk types:
● SATA hard disk drive (HDD)
● SATA solid state drive (SSD)
10
Overview