Setup Guide

Four-Post Rack Installation 15

Installing the Mounting Rails in the Rack

NOTE: The following instructions apply to both sliding mounting rails and static mounting rails.

Installing RapidRails Mounting Rails

At the front of the rack cabinet, position one of the mounting rails so that its mounting-bracket flange

fits between the marks or tape you placed (or numbered locations) on the vertical rails in "Marking the

Rack" (see Figure 1-7).

The top mounting hook on the front mounting-bracket flange should enter the top hole between the

marks you made on the vertical rails.

Figure 1-7. Installing RapidRails Mounting Rails

1 mounting hooks (2) 2 push buttons (2) 3 mounting rails (2)

front of rack