Owners Manual

3. TPM 4. TPM connector
Next steps
1. Install the system board.
Related references
Safety instructions on page 71
System board connectors on page 171
Related tasks
Before working inside your system on page 72
Installing the system board on page 163
After working inside your system on page 72
Initializing the TPM for BitLocker users
Steps
Initialize the TPM.
For more information about initializing the TPM, see https://technet.microsoft.com/en-us/library/cc753140.aspx.
The TPM Status changes to Enabled, Activated.
Initializing the TPM for TXT users
Steps
1. While booting your system, press F2 to enter System Setup.
2. On the System Setup Main Menu screen, click System BIOS > System Security Settings.
3. From the TPM Security option, select On with Pre-boot Measurements.
4. From the TPM Command option, select Activate.
5. Save the settings.
6. Restart your system.
7. Enter System Setup again.
8. On the System Setup Main Menu screen, click System BIOS > System Security Settings.
9. From the Intel TXT option, select On.
Installing and removing system components
167