Hardware manual

48 About Your System
Shutdown failure General system error. Run the online diagnostic
tests. See "Running the
System Diagnostics."
The amount of
system memory has
changed
Memory has been added or
removed or a memory
module may be faulty.
If memory has been added or
removed, this message is
informative and can be
ignored. If memory has not
been added or removed,
check the SEL to determine
if single-bit or multi-bit
errors were detected and
replace the faulty memory
module.
See "Troubleshooting System
Memory."
Table 1-2. System Messages (continued)
Message Causes Corrective Actions