API Guide

Table Of Contents
Table 88. Parameters for NetworkDeviceFunction Settings (continued)
Parameter Type Description
SecondaryVLANEnable Boolean It indicates if this VLAN is enabled for the
Secondary iSCSI boot target.
SecondaryVLANId Int64 The 802.1q VLAN ID to use for iSCSI boot
from the Secondary target. This VLAN ID is
only used if SecondaryVLANEnable is true.
SecondaryDNS String The IPv6 or IPv4 address of the Secondary
DNS server for the iSCSI boot initiator.
IPMaskDNSViaDHCP Boolean A boolean indicating whether the iSCSI boot
initiator uses DHCP to obtain the iniator name,
IP address, and netmask.
AuthenticationMethod NetworkDeviceFunction.v1_0_0.Authenticatio
nMethod
The iSCSI boot authentication method for this
network device function.
CHAPUsername String The username for CHAP authentication.
CHAPSecret String The shared secret for CHAP authentication.
Status codes
Table 89. Status codes
HTTP status code Extended information Error message code
200
202
400
Base.1.0.PropertyValueTypeError
Base.1.0.PropertyUnknown
403 Base.1.0.InsufficientPrivilege RAC0506
405 Base.1.0.GeneralError SYS402
500 Base.1.0.InternalError
NetworkInterface collection
Description
This resource is used to represent the collection of the Network subsystem under ComputerSystem.
URL
/redfish/v1/Systems/System.Embedded.1/NetworkInterfaces
HTTP methods and privileges
Table 90. HTTP methods and privileges for NetworkInterface
HTTP method Required privilege
GET Login
60 Redfish resources