Users Guide

Table 4. iDRAC Quick Sync 2 indicators (continued)
Wireless indicator code Condition Corrective action
Blinks white rapidly Indicates data transfer activity.
If the indicator continues to blink indefinitely, see the
Getting help section.
Blinks white slowly Indicates that firmware update is in
progress.
If the indicator continues to blink indefinitely, see the
Getting help section.
Blinks white five times rapidly and
then turns off
Indicates that the iDRAC Quick Sync 2
feature is disabled.
Check if iDRAC Quick Sync 2 feature is configured to
be disabled by iDRAC. If the problem persists, see the
Getting help section. For more information, see
Integrated Dell Remote Access Controller User's
Guide at www.dell.com/poweredgemanualsor Dell
OpenManage Server Administrator User’s Guide at
www.dell.com/openmanagemanuals
Amber solid Indicates that the system is in fail-safe
mode.
Restart the system. If the problem persists, see the
Getting help section.
Blinking amber Indicates that the iDRAC Quick Sync 2
hardware is not responding properly.
Restart the system. If the problem persists, see the
Getting help section.
iDRAC Direct LED indicator codes
The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC subsystem.
iDRAC Direct LED indicator is located below the iDRAC Direct port on the front panel.
The following table describes iDRAC Direct activity when configuring iDRAC Direct by using your laptop or tablet and USB to micro USB
(type AB) cable:
Table 5. iDRAC Direct LED indicator codes
iDRAC Direct LED
indicator pattern
Condition
Solid green for two seconds
Indicates that the laptop or tablet is connected.
Flashing green (on for two
seconds and off for two
seconds)
Indicates that the laptop or tablet connected is recognized.
Turns off Indicates that the laptop or tablet is unplugged.
NIC indicator codes
Each NIC on the back panel has indicators that provide information about the activity and link status. The activity LED indicator indicates if
data is flowing through NIC, and the link LED indicator indicates the speed of the connected network.
Figure 3. NIC indicators
1. Link LED indicator
2. Activity LED indicator
Table 6. NIC indicators
Status Condition
Link and activity indicators are off The NIC is not connected to the network.
12 Diagnostic indicators