Manual

Installing System Components 113
Figure 3-14. Removing and Installing a USB Memory Key
Internal NIC Hardware Key
Any additional future functionalities for the system’s integrated NICs are
enabled by installing an optional NIC hardware key in the iSCSI KEY socket
on the system board. See Figure 6-1.
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
NOTE: TOE operating system support and the Microsoft
®
scalable network pack
are required for TOE functionality.
1 Turn off the system, including any attached peripherals, and disconnect
the system from its electrical outlet.
2 Open the system. See "Opening the System" on page 84.
3 Locate the ISCSI KEY connector on the system board. See Figure 6-1.
4 Insert the NIC hardware key into the connector onto the board. See
Figure 3-15.
1 USB memory key connector 2 USB memory key
1
2
book.book Page 113 Thursday, February 18, 2010 2:06 PM