Manual

130 Installing System Components
Figure 3-21. Removing or Installing the RAID Battery
Installing the RAID Battery
1 Insert the RAID battery into the battery carrier. See Figure 3-21.
2 Align the tabs on the battery carrier with the battery carrier slots on the
chassis.
3 Slide the battery carrier into the battery carrier slots until it locks into
place. See Figure 3-21.
4 If applicable, connect the battery cable to the connector on the storage
card.
5 Route the power/data cables along the chassis wall. See step 2 and step 3 of
"Sliding the Front-Chassis Assembly" on page 98.
6 Close the system. See "Closing the System" on page 85.
1 RAID battery cable 2 RAID battery
3 battery carrier 4 tabs (2)
5 slots (2)
1
3
2
4
5
book.book Page 130 Thursday, February 18, 2010 2:06 PM