Manual

Installing System Components 131
7 Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
Internal Dual SD Module (Optional)
Removing the Internal Dual SD Module
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening the System" on page 84.
3 If installed, remove the SD cards from the internal dual SD module.
4 Disconnect the cable from the internal dual SD module. See Figure 3-22.
5 Lift upwards on the latch securing the internal dual SD module to the
front-chassis assembly and lift the module out of the assembly. See
Figure 3-22.
6 Close the system. See "Closing the System" on page 85.
7 Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
book.book Page 131 Thursday, February 18, 2010 2:06 PM