Manual

24 About Your System
E1116 Memory
disabled,
temp above
range. Power
cycle AC.
Memory exceeded allowable
temperature and has been
disabled to prevent damage
to the components.
Remove AC power to the
system for 10 seconds and
restart the system.
See "Troubleshooting
System Cooling
Problems" on page 167. If
the problem persists, see
"Getting Help" on
page 195.
E1210 Motherboard
battery
failure.
Check
battery.
CMOS battery is missing or
the voltage is outside the
allowable range.
See "Troubleshooting the
System Battery" on
page 166.
E1211 RAID
Controller
battery
failure.
Check
battery.
RAID battery is either
missing, bad, or unable to
recharge due to thermal
issues.
Reseat the RAID battery
connector. See "Installing
the RAID Battery" on
page 130 and
"Troubleshooting System
Cooling Problems" on
page 167.
E1216 3.3V
Regulator
failure.
Reseat PCIe
cards.
3.3 V voltage regulator
failed.
Remove and reseat the
PCIe expansion cards. If
the problem persists, see
"Troubleshooting
Expansion Cards" on
page 177.
E1222 CPU # VCACHE
Regulator
failure.
Contact
support.
Processor voltage regulator
failed.
Reseat the processor(s).
See "Troubleshooting the
Processors" on page 178.
If the problem persists,
see "Getting Help" on
page 195.
Code Text Causes Corrective Actions
book.book Page 24 Thursday, February 18, 2010 2:06 PM