Manual

About Your System 49
DIMM population
violation: DIMM
<x> Lockstep Pair
DIMM <x&y>
disabled. Please
populate DIMM(s)
with largest
number of ranks
in the lowest
slot.
Different rank memory
modules are mixed following
an invalid configuration.
Ensure that the memory
modules are installed in a
valid configuration. See
"General Memory Module
Installation Guidelines" on
page 100.
DIMM population
violation: DIMM
<x> Lockstep Pair
DIMM <x&y>
disabled. Please
ensure each
lockstep pair is
installed
correctly.
The memory
configuration is
not optimal.
Invalid memory
configuration. The system
will run but with reduced
functionality.
Ensure that the memory
modules are installed in a
valid configuration. See
"General Memory Module
Installation Guidelines" on
page 100. If the problem
persists, see
"Troubleshooting System
Memory" on page 169.
Memory address
line failure at
address, read
value expecting
value
Faulty or improperly installed
memory modules.
See "Troubleshooting System
Memory" on page 169.
Message Causes Corrective Actions
book.book Page 49 Thursday, February 18, 2010 2:06 PM