Owner manual

Information Update 9
No Configurable memory
detected. System Halted.
There is a system memory configuration problem.
Memory bus redundancy
feature unavailable on
Memory Riser X. System
can continue to operate
normally without
redundancy.
Recommend power-down
and reseat Riser X or strike
<F1> key to continue
without redundancy.
The PowerEdge R910 memory riser fails to support
memory bus redundancy.
MemBIST error: Memory
Riser X DIMM <1>
Displays the location of memory riser and DIMM slot of
the failed memory module.
Memory Initialization
Warning: Memory size
and/or performance may be
reduced. DIMM
unsupported: Memory
Riser <X DIMM 1 >
Memory Riser X Lockstep
Pair <DIMM 1 & DIMM
2> disabled. Unsupported
Buffer/Processor and
Memory Configuration.
Please replace the
Riser/Processor/DIMM or
remove the lockstep pair.
The PowerEdge R910 memory riser has 4 Gb DRAM
RDIMMs but the processor is not supported (Intel Xeon
processor 7500 series) and the memory riser board has
no Roman numeral "II" label.
Message Description