User Manual

Installation Guide 17

Figure 1-7. Removing the Front-Door Hinges

Remove the hinge spring from the hinge body.

Place the hinge pin, retention clip, and spring in a safe location.

Using the 4-mm Allen wrench, remove the Allen bolts that secure the

hinge body to the rack, and place the bolts with the hinge pin,

retention clip, and body spring.

Rotate the hinge body 180 degrees so that the hinge-pin holes are

now on the right side of the hinge body (see Figure 1-8).

1 hinge pin 2 top hinge

3 bottom hinge 4 hinge post

5 retention clip 6 body spring