Instruction Manual

Installing and Configuring Hardware 43

Figure 4-2. Installing a PERC H700 Adapter

Tighten the bracket screw, if any, or use the system’s retention clips

to secure the controller to the system’s chassis.

Replace the cover of the system. For more information on closing the

system, see the

Hardware Owner’s Manual

shipped with your system or at

support.dell.com/manuals

For the PERC H800 adapter, connect the cable from the external enclosure

to the controller. For more information, see Figure 4-3.

1 PCI-e slot 2 PERC H700 adapter

3 filler brackets 4 bracket screw

PERC7.2_UG.book Page 43 Thursday, March 3, 2011 2:14 PM