Instruction Manual

44 Installing and Configuring Hardware
Figure 4-3. Connecting the Cable From the External Enclosure
10 For the PERC H700 adapter, connect the cables from the backplane of the
system to the controller. The primary SAS connector is labeled
SAS_A and
the secondary SAS connector is labeled
SAS_B . For more information, see
Figure 4-4.
1 connector on the controller 2 cable from the external enclosure
3system
2
3
1
PERC7.2_UG.book Page 44 Thursday, March 3, 2011 2:14 PM