Instruction Manual

62 Installing and Configuring Hardware
2 Align the keyed edge of the DIMM to the physical divider on the memory
socket to avoid damage to the module.
3 Insert the DIMM in the memory socket. Apply a constant, downward
pressure on both ends or the middle of the
DIMM until the retention clips
fall in the allotted slots on either side of the
DIMM . See Figure 4-17.
Figure 4-17. Installing the TBBU on a PERC H800 Adapter
1 PERC H800 2 retention clip
3 memory socket 4 DIMM
1
2
3
4
PERC7.2_UG.book Page 62 Thursday, March 3, 2011 2:14 PM