Owners Manual

Figure 55. Removing and Installing a Non-Redundant AC Power Supply

1. screw 2. power supply unit cage

3. non-redundant power supply 4. standoff on the chassis

5. P1 cable connector 6. P2 cable connector

7. P3 cable connector 8. backplane connector

Installing A Non-Redundant AC Power Supply

CAUTION: Many repairs may only be done by a certified service technician. You should only perform

troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or

telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your

warranty. Read and follow the safety instructions that came with the product.

1. Unpack the new power supply.

2. Open the system.

3. Slide the new power supply into the power supply unit cage until the power supply is fully seated.

4. Tighten the screw to secure the power supply to the chassis.