CLI Guide

• To generate and view information about the inventory of fans,
run the following command:
racadm storage get fans --refkey
<enclosure FQDDs separated by comma>
racadm storage get fans --refkey
<enclosure FQDDs separated by comma > -o
racadm storage get fans --refkey
<enclosure FQDDs separated by comma> -o -
p <property names separated by comma>
• To generate and view information about the inventory of
EMMs, run the following command:
racadm storage get emms -refkey
<enclosure FQDDs separated by comma>
racadm storage get emms --refkey
<enclosure FQDDs separated by comma> -o
racadm storage get emms --refkey
<enclosure FQDDs separated by comma> -o -
p <property names separated by comma>
• To generate and view information about the inventory of PSU,
run the following command:
racadm storage get psus -refkey
<enclosure FQDDs separated by comma>
racadm storage get psus --refkey
<enclosure FQDDs separated by comma> -o
racadm storage get psus --refkey
<enclosure FQDDs separated by comma> -o -
p <property names separated by comma>
Configuration
• To view the help details for a configuration command, run the
following command:
racadm storage help <command>
where command can take below values
converttoraid, converttononraid,
controllers, clearconfig,
createsecuritykey, createvd,
deletesecuritykey, deletevd, encryptvd,
enclosures, emms, fans, hotspare,
importconfig, ccheck, secureerase,
preparetoremove, blink, unblink,
cancelcheck, init, modifysecuritykey,
psus, pdisks, resetconfig, tempprobes,
vdisks, cancelbgi,
replacephysicaldisk, setbootvd,
forceonline, forceoffline, unlock and
patrolread.
122
RACADM Subcommand Details