CLI Guide

NOTE: Convert to RAID and non-RAID is not
supported on PERC 10 and BOSS controllers.
racadm storage converttoraid:<PD FQDD>
racadm storage hotspare:<Physical Disk
FQDD> -assign yes -type dhs -vdkey: <FQDD
of VD>
racadm storage hotspare:<Physical Disk
FQDD> -assign yes –type ghs
racadm storage hotspare:<Physical Disk
FQDD> -assign no
racadm storage patrolread:<controller
FQDD> -state start|stop
racadm raid cancelbgi:<VD FQDD>
racadm raid replacephysicaldisk:<PD FQDD>
-dstpd <PD FQDD>
NOTE:
replacephysicaldisk method is not supported
on non-redundant RAID volumes.
racadm raid setbootvd:<Controller FQDD> -
vd <VD FQDD>
racadm raid forceonline:<PD FQDD>
racadm raid forceoffline:<PD FQDD>
racadm storage unlock:<Controller FQDD> -
key <Key id> -passwd <passphrase>
NOTE:
If the –assign option is no, you cannot add
other options. If the –assign option is yes and if the
-type option is not present, the global hotspare
(ghs) is created by default.
• To reset, clear, and import the storage configuration to the
controller, run the following command:
racadm storage importconfig:<Controller
FQDD>
racadm storage resetconfig:<Controller
FQDD>
racadm storage clearconfig:<Controller
FQDD>
124
RACADM Subcommand Details