CLI Guide

EncryptionMode = None
SasAddress = 0x5B083FE0E3EF5A00
PciDeviceId = 0x5d
PciSubdeviceId = 0x1f4d
PciVendorId = 0x1000
PciSubvendorId = 0x1028
PciBus = 0x7
PciDevice = 0x0
PciFunction = 0x0
BusWidth = 8x or x8
SlotLength = Other
SlotType = PCI Express Gen3
MaxCapableSpeed = 12.0 Gb/s
LearnMode = Not supported
T10PICapability = Capable
SupportRAID10UnevenSpans = Supported
SupportEnhancedAutoForeignImport = Supported
EnhancedAutoImportForeignConfig = Disabled
SupportControllerBootMode = Supported
ControllerBootMode = Continue Boot On Error
RealtimeConfigurationCapability = Capable
CurrentControllerMode = RAID
BootVD = Disk.Virtual.0:RAID.Integrated.1-1
The following command displays the output for software RAID and full controller objects along with their keys:
racadm storage get controllers -o
RAID.Embedded.1-1
Status = Unknown
DeviceDescription = Embedded RAID Controller 1
RollupStatus = Unknown
Name = PERC S130 Controller (PCI Slot 0)
PciSlot = 0
FirmwareVersion = 4.0.0-0037
DriverVersion = Information Not Available
RebuildRate = 0
BgiRate = 0
CheckConsistencyRate = 0
ReconstructRate = 0
PatrolReadRate = 0
PatrolReadMode = Not supported
PatrolReadState = Unknown
CheckConsistencyMode = Not supported
LoadBalanceSetting = Not Supported
CopybackMode = Not supported
PreservedCache = Not Present
CacheMemorySize = 0 MB
PersistHotspare = Disabled
SpindownUnconfiguredDrives = Disabled
SpindownHotspare = Disabled
Timeintervalforspindown = 0 (Minutes)
SecurityStatus = Unknown
EncryptionMode = None
SasAddress = Not applicable
PciDeviceId = 0x8d66
PciSubdeviceId = 0x61b
PciVendorId = 0x8086
PciSubvendorId = 0x1028
PciBus = 0x0
PciDevice = 0x0
PciFunction = 0x0
BusWidth = Unknown
SlotLength = Unknown
SlotType = Unknown
MaxCapableSpeed = 6.0 Gb/s
LearnMode = Not supported
T10PICapability = Not Capable
SupportRAID10UnevenSpans = Not Supported
SupportEnhancedAutoForeignImport = Not Supported
EnhancedAutoImportForeignConfig = Unknown
SupportControllerBootMode = Not Supported
RealtimeConfigurationCapability = Incapable
130
RACADM Subcommand Details