CLI Guide

ManualsBrandsDell ManualsComputer HardwarePowerEdge T430

131

132

133

134

135

136

137

138

139

140

• To unlock storage

racadm storage unlock:RAID.Integrated.1-1 -key 1234 -passwd Dell@333

swinventory

Table 95. Details of swinventory

Description Displays the list of software objects and associated properties installed on a server.

NOTE: Lifecycle Controller and CSIOR may not be enabled to run this subcommand.

Synopsis

racadm swinventory

Input

racadm swinventory

Output

racadm swinventory

------------------SOFTWARE INVENTORY-------------------

ComponentType = FIRMWARE

ElementName = Power Supply.Slot.2

FQDD = PSU.Slot.2

InstallationDate = 2013-06-11T13:02:46Z

Current Version = 07.2B.7D

---------------------------------------------------------------

ComponentType = FIRMWARE

ElementName = Integrated Remote Access Controller

FQDD = iDRAC.Embedded.1-1

InstallationDate = NA

Rollback Version = 1.50.50

----------------------------------------------------------------

ComponentType = FIRMWARE

ElementName = Integrated Remote Access Controller

FQDD = iDRAC.Embedded.1-1

InstallationDate = 2013-06-11T13:02:48Z

Current Version = 1.50.50

NOTE: Configuration changes and firmware updates that are made within the operating system may not reflect properly

in the inventory until you perform a server restart.

systemconfig

Table 96. Details of systemconfig

Description Enables you to perform the following:

• Backup and restore for iDRAC and entire system configuration.

• Automatic scheduling of backup operation.

• View the auto backup feature settings.

• Clear the auto backup feature settings.

NOTE:

• To run this subcommand, you require the Server Profile Export and Import license.

• Backup operation is licensed (Enterprise) but restore operation is not licensed.

• If Lifecycle Controller is disabled, starting a restore operation is unsuccessful.

• If CSIOR is disabled, the system inventory can have old data during the backup operation. An

appropriate warning message is displayed.

•

The autobackupscheduler can be enabled or disabled. For more information about enable or

disable, see LifecycleController.LCAttributes.autobackup

RACADM Subcommand Details 139