CLI Guide

Default
192.168.0
cfgNicStaticUseDhcp (Read or Write)
Table 121. Details of cfgNicStaticUseDhcp
Description
Specifies whether DHCP is used to configure the IPv4 network.
Legal Values
• 0 — IP Address, subnet mask and gateway are configured on the device.
• 1 — IP Address, subnet mask and gateway are assigned from the DHCP server.
Default
0 — Do not use DHCP
NOTE: If this object is modified, then the object cfgNicUseDhcp is also modified.
cfgNicStaticNetmask (Read or Write)
Table 122. Details of cfgNicStaticNetmask
Description
Returns or sets the static IPv4 Netmask.
NOTE: Only set the current IPv4 netmask, if cfgNicUseDhcp is set to 0 (false).
Legal Values
Any Valid IPv4 Netmask
Default
255.255.255.0
cfgNicStaticGateway (Read or Write)
Table 123. Details of cfgNicStaticGateway
Description
Returns or sets the static IPv4 address.
Legal Values
Any Valid IPv4 address
Default
192.168.0.120
cfgDNSStaticServersFromDHCP (Read or Write)
Table 124. Details of cfgDNSStaticServersFromDHCP
Description
Specifies the DNS server static IP addresses.
Legal Values
• DNS Addresses are configured on the Device
• DNS Addresses are assigned via DHCP
Default
0
cfgDNSStaticServer1 (Read or Write)
Table 125. Details of cfgDNSStaticServer1
Description
Specifies the IP address for DNS server 1.
iDRAC Property Database Group and Object Descriptions 159