CLI Guide

Legal Values
String from 0 to 63 characters.
Valid host name or IPv4 or IPv6 address.
Default
<blank>
cfgUserAdmin
This group provides configuration information about the users allowed to access iDRAC through the available remote interfaces.
This group provides configuration information about the users allowed to access CMC through the available remote interfaces.
Up to 16 instances of the user group are allowed. Each instance represents the configuration for an individual user.
NOTE: In the current CMC firmware version, the objects cfgUserAdminEnable and cfgUserAdminPrivilege are
interrelated; changing the value of one property causes the value of the other property to change. For example, if a user
does not have login privilege, the user is disabled by default. When you enable the user by changing the value of the
UserAdminEnable to 1, the right-most digit of the UserAdminPrivilege also becomes 1. On the other hand, if you change
the right-most digit of the UserAdminPrivilege to 0, the value of the UserAdminEnable becomes 0.
Use this object with the
config or getconfig subcommands. To use the command as follows: -i <index group>, supply an index
group number
To use this object property, you must have the Chassis Configuration Administrator privilege.
NOTE: You can configure a setting that does not have the hash sign (#) prefixed in the output. To modify a configurable
object, use the —o option.
The following sections provide information about the objects in the cfgUserAdmin group.
cfgUserAdminIndex - Read Only
Table 138. Details of cfgUserAdminIndex attribute
Description The unique index of a user.
The index number is used to specify a unique group name. Only valid for indexed groups.
Legal Values
This parameter is populated based on the existing instances.
The parameter specifies decimal integer 1–16.
Default
<index of the instance>
cfgUserAdminIpmiLanPrivilege (Read or Write)
Table 139. Details of cfgUserAdminIpmiLanPrivilege
Description The maximum privilege on the IPMI LAN channel.
Legal Values
• 2(User)
• 3(Operator)
• 4(Administrator)
• 15(No access)
Default
• 4(User 2)
• 15(All others)
iDRAC Property Database Group and Object Descriptions 163