CLI Guide

Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
NOTE: You can configure a setting that does not have the hash sign (#) prefixed in the output. To modify a configurable
object, use the —o option.
The following sections provide information about the objects in the cfgOobSnmp group.
cfgOobSnmpAgentCommunity (Read or Write)
Table 169. Details of cfgOobSnmpAgentCommunit attribute
Description
Specifies the SNMP Community Name used for SNMP traps. The community string acts as a password shared
between different hosts over the network. This community string value must match with the other hosts for any
kind of communication through SNMP.
Legal Values
A string of up to 31 characters.
Default
public
Example
racadm getconfig -g cfgOobSnmp
cfgOobSnmpTrapsEnable=1
cfgOobSnmpAgentCommunity=public
cfgOobSnmpAgentEnable (Read or Write)
Table 170. Details of cfgOobSnmpAgentEnable attribute
Description
Enables or disables the SNMP agent in iDRAC.
Enables or disables the SNMP agent in CMC.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgRacTuning
This group is used to configure various configuration properties, such as valid ports and security port restrictions.
Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
NOTE:
You can configure a setting that does not have the hash sign (#) prefixed in the output. To modify a configurable
object, use the —o option.
To apply this setting to iDRAC, use the —m option.
The following sections provide information about the objects in the cfgRacTuning group.
NOTE:
Only the following objects are displayed, if —m option is used:
• cfgRacTuneWebserverEnable
• cfgRacTuneHttpPort
• cfgRacTuneHttpsPort
iDRAC Property Database Group and Object Descriptions 173