CLI Guide

cfgVirMediaAttached (Read or Write)
Table 193. Details of cfgVirMediaAttached
Description
This object is used to attach virtual devices to the system via the USB bus. When the devices are attached, the
server recognizes valid USB mass storage devices attached to the system. Which is equivalent to attaching a local
USB CDROM/floppy drive to a USB port on the system. When the devices are attached, they can be connected
to the virtual devices remotely using iDRAC web interface or the CLI. Setting this object to 0 causes the devices to
detach from the USB bus.
NOTE: Modifying this property does not impact the remote file sharing operation.
Legal Values
• 0 = Detach
• 1 = Attach
• 2 = AutoAttach
Default
0
cfgVirtualBootOnce (Read or Write)
Table 194. Details of cfgVirtualBootOnce
Description
Enables or disables the Virtual Media Boot Once feature of iDRAC.
If this property is enabled when the host server is rebooted, this feature attempts to start from the virtual media
devices — if the appropriate media is installed in the device.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgVirMediaFloppyEmulation (Read or Write)
Table 195. Details of cfgVirMediaFloppyEmulation
Description
When set to 0, the virtual floppy drive is recognized as a removable disk by Windows operating systems. Windows
operating systems assigns a drive letter that is C: or higher during enumeration. When set to1, the Virtual Floppy
drive is seen as a floppy drive by Windows operating systems. Windows operating systems assigns a drive letter of
A: or B:.
NOTE: Virtual Media has to be reattached (using cfgVirMediaAttached) for this change to take
effect.
Legal Values
• 1 (TRUE)
• 0(FALSE)
Default
0
cfgSDWriteProtect (Read Only)
Table 196. Details of cfgSDWriteProtect
Description
Displays if the physical write protect latch on the SD card is enabled or disabled.
NOTE: This command is deprecated from 12G iDRAC 1.0 release onwards. The functionality of this
command is covered by cfgVFlashSDWriteProtect. While execution of the cfgSDWriteProtect
180 iDRAC Property Database Group and Object Descriptions