CLI Guide

cfgIpmiSol
This group is used to configure the Serial Over LAN (SOL) capabilities of the system.
The following sections provide information about the objects in the cfgIpmiSol group.
cfgIpmiSolEnable (Read or Write)
Table 243. Details of cfgIpmiSolEnable
Description
Enables or disables SOL.
Legal Values
• 1(TRUE)
• 0(FALSE)
Default
1
cfgIpmiSolBaudRate (Read or Write)
Table 244. Details of cfgIpmiSolBaudRate
Description
Specifies baud rate for serial communication over LAN.
Legal Values
9600, 19200, 57600, 115200
Default
115200
cfgIpmiSolMinPrivilege (Read or Write)
Table 245. Details of cfgIpmiSolMinPrivilege
Description
Specifies the minimum privilege level required for SOL access.
Legal Values
• 2(User)
• 3(Operator)
• 4(Administrator)
Default
4
cfgIpmiSolAccumulateInterval (Read or Write)
Table 246. Details of cfgIpmiSolAccumulateInterval
Description
Specifies the typical amount of time that iDRAC waits before transmitting a partial SOL character data packet. This
value is 1-based 5ms increments.
Legal Values
1–255
Default
10
194 iDRAC Property Database Group and Object Descriptions