CLI Guide

NOTE: The getconfig subcommand always shows eight cfgServerPowerSupply indexes, even if two power
supplies are installed in the system or the system supports a maximum of two PSUs. For the uninstalled and
unsupported units, all the objects in the cfgServerPowerSupply group displays a value of 0.
The following sections provide information about the objects in the cfgServerPowerSupply group.
cfgServerPowerSupplyIndex
Table 301. Details of cfgServerPowerSupplyIndex
Description
Specifies index of the PSU.
NOTE: Indexes 1–8 are supported to support up to 8 PSUs. If any PSU is not present then
cfgServerPowerSupplyOnlineStatus does not exist and for all the other properties, it is 0.
Legal Values
Integer 1–8
Default
None
cfgServerPowerSupplyMaxInputPower (Read Only)
Table 302. Details of cfgServerPowerSupplyMaxInputPower
Description
Displays the AC input rated power in Watts.
Legal Values
A string of up to 32 characters.
Default
0
cfgServerPowerSupplyMaxOutputPower (Read Only)
Table 303. Details of cfgServerPowerSupplyMaxOutputPower
Description
Displays the AC output rated power in Watts.
Legal Values
A string of up to 32 characters.
Default
0
cfgServerPowerSupplyOnlineStatus (Read Only)
Table 304. Details of cfgServerPowerSupplyOnlineStatus
Description
Displays the status of the PSU.
Legal Values
• 0 — Present
• 1 — Absent
• 2 — Failure
• 3 — Predictive failure
Default 0 — Present
208 iDRAC Property Database Group and Object Descriptions