CLI Guide

iDRAC.NIC.Selection (Read or Write)
Table 647. Details of iDRAC.NIC.Selection attribute
Description
Specifies the current mode of operation for the iDRAC network interface controller.
Legal Values
• 1 — Dedicated
• 2 — LOM1
• 3 — LOM2
• 4 — LOM3
• 5 — LOM4
Default Value
1 — Dedicated
Write Privilege
Configure iDRAC
License Required
iDRAC Express or iDRAC Enterprise
Dependency
None
NOTE: Values for the platforms with single LOM port are, 1 — Dedicated and 2 — LOM1.
iDRAC.NIC.SharedNICScanTime (Read or Write)
Table 648. Details of iDRAC.NIC.SharedNICScanTime attribute
Description
Wait time for the iDRAC to switch from shared mode to dedicated mode.
Legal Values
Integral values: 5–255
Default Value
30
Write Privilege
Configure iDRAC
License Required
iDRAC Express or iDRAC Enterprise
Dependency
None
iDRAC.NIC.Speed (Read or Write)
Table 649. Details of iDRAC.NIC.Speed attribute
Description
Specifies the speed for iDRAC NIC.
NOTE: To set this property:
• iDRAC.NIC.Selection must be set to Dedicated mode.
• iDRAC.NIC.Autoneg must be disabled.
• iDRAC.IPv4.Enable, iDRAC.IPv4.DHCPEnable, iDRAC.IPv6.Enable, and
iDRAC.IPv6.AutoConfig must be enabled.
Legal Values
• 0 — 10
• 1 — 100
• 2 — 1000
NOTE: You cannot manually set the Network Speed to 1000 MB. This option is available only if
iDRAC.NIC.Autoneg is set to 1 (Enabled).
314 Database Objects With Get and Set Commands