CLI Guide

BIOS.BiosBootSettings.BootSeqRetry (Read or Write)
Table 811. Details of BIOS.BiosBootSettings.BootSeqRetry attribute
Description
Enables or disables the boot sequence retry feature.
Legal Values
Enabled
Disabled
Default Value Not Applicable
Write Privilege
Server Control
License Required
iDRAC Express or iDRAC Enterprise
Dependency
None
BIOS.BiosBootSettings.HddFailover (Read or Write)
Table 812. Details of BIOS.BiosBootSettings.HddFailover attribute
Description Specifies the devices in the Hard-Disk Drive Sequence menu that are attempted in the boot sequence. This
property applies to BIOS Boot Mode only, and is disabled when Boot Mode is set to UEFI. When set to Disabled
(default), only the first Hard-Disk device in the list is attempted to boot. When set to Enabled, all Hard-Disk
devices are attempted in order, as listed in the Hard-Disk Drive Sequence.
Legal Values
• Enabled
• Disabled
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
BIOS.BiosBootSettings.HddSeq (Read or Write)
Table 813. Details of BIOS.BiosBootSettings.HddSeq attribute
Description
HDD boot sequence
Legal Values
None
Default Value Not Applicable
Write Privilege
Server Control
License Required
iDRAC Express or iDRAC Enterprise
Dependency
Read Only if Boot mode is set to UEFI
BIOS.BiosBootSettings.UefiBootSeq (Read or Write)
Table 814. Details of BIOS.BiosBootSettings.UefiBootSeq attribute
Description
UEFI boot sequence
Legal Values
None
Database Objects With Get and Set Commands 367