CLI Guide

Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency None
BIOS.SysSecurity.SHA256SetupPasswordSalt (Read or
Write)
Table 1034. Details of BIOS.SysSecurity.SHA256SetupPasswordSalt attribute
Description Indicates the Salt string added to the setup password before hash.
Legal Values String of 32 characters
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency None
BIOS.SysSecurity.SignedFirmwareUpdate (Read or Write)
Table 1035. Details of BIOS.SysSecurity.SignedFirmwareUpdate attribute
Description Enables the signed BIOS update feature. Once enabled, this attribute cannot be disabled. When you change the
value from disabled to enabled, a warning message is displayed.
Legal Values
• Enabled
• Disabled
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency None
BIOS.SysSecurity.SysPassword (Read or Write)
Table 1036. Details of BIOS.SysSecurity.SysPassword attribute
Description
Provides the system password. Optional parameter –o <string> is used with this object to provide old password
as an authentication for changing the previously configured password to the new password.
The password can include the following:
• Up to 32 characters including whitespace.
• Contain numbers 0 through 9.
• Only lower case alphabets are accepted.
• Special characters accepted are +, ", ,, -, ., /, ;, [, \, ], `.
To enable password modification, J_EN_PASSWD must be installed.
To clear the already configured password, use the option available under F2 (system setup) during system start.
Legal Values
String of up to 22 characters
Default Value Not Applicable
Database Objects With Get and Set Commands 439