CLI Guide

• Upload the firmware image from the FTP server and start the firmware update.

racadm fwupdate -f 192.168.0.100 fred xxx -d firmimg.cmc -m cmc-active

• Upload a firmware image from the client and start firmware update.

racadm fwupdate -p -u -d firmimg.cmc

• Start IOM infrastructure firmware update.

racadm fwupdate -u -m iominf-1

• Update firmware on both the CMCs.

racadm fwupdate -g -u -a 192.168.0.2 -d firmimg.cmc -m cmc-active -m cmc-

standby

• Update firmware on multiple servers.

racadm fwupdate -g -u -a 192.168.0.2 -d firmimg.imc -m server-1 -m server-2 -m

server-3

• Update firmware on servers of iDRAC generation.

racadm fwupdate -g -u -a 192.168.0.2 -d firmimg.imc -m server-iDRAC

• Update firmware on multiple IOM infrastructure devices.

racadm fwupdate -u -m iominf-4 -m iominf-5 -m iominf-6

• Query the status of all firmware targets to be updated.

racadm fwupdate -s -m all

• Query the current status of the firmware update process for a particular module.

racadm fwupdate -s -m <module>

• Download firmware update file from a specified location on the TFTP server at a specific IP address.

racadm fwupdate -g -u -a 192.168.0.2 -d <path>

After the image file is downloaded from the TFTP server, the update process begins. When completed, CMC is

reset.

• Read the status of the firmware update.

racadm fwupdate -s

• Cancel a firmware update in progress.

racadm fwupdate –c

• Uploads a firmware image from the client and start firmware update:

racadm fwupdate -p -u -d /tmp/images

• Upload firmware image from FTP server and start firmware update:

racadm fwupdate -f 192.168.0.10 test test -d firmimg.d7

• Upload firmware image from TFTP server and start firmware update:

racadm fwupdate -g -u -a 192.168.0.100 -d /tmp/images

• Query the current status of the firmware update process:

racadm fwupdate -s

• Rollback to the standby firmware:

racadm fwupdate -r

• Upload firmware image from TFTP server, start firmware update. After firmware update is complete, delete

previous iDRAC configuration:

racadm fwupdate -g -u -a 192.168.0.100 -d /tmp/images --clearcfg

NOTE:

Firmware update from local RACADM (using -p -u -d options) is not supported on Linux

OS.

RACADM Subcommand Details 59