CLI Guide

DHCP : Enabled
DHCPServerV4 : 10.94.224.25
MAC Address : 14-FE-B5-FF-B1-9C
FQDD : NIC.Integrated.1-1-1
IPv4 Address : 10.94.225.189
Subnet Mask : 255.255.255.128
IPv6 Address : fe80::7c5f:a114:84d4:17f6
Prefix Length : 64
IPv4 Gateway Address : 10.94.225.129
IPv4 DNSServer Address 0: 10.116.2.250
IPv4 DNSServer Address 1: 10.116.2.251
getled
Table 27. Details of getled attribute
Description Displays the LED settings on a module: blinking, not blinking, or unknown (for empty slots).
To run this subcommand, you must have the Login User privilege.
Synopsis
racadm getled
racadm getled -m <module>
Input
—m <module> can be one of the following:
• server-<n> where n=1–16
• server-<nx> where n=1–8; x=a, b, c, d (lower case)
• switch-<n> where n=1–6
• chassis
• cmc-active
Output
• LED is blinking
• LED is not-blinking
Example
• racadm getled -m server-10
<module> <LED state>
server-10 Blinking
•
racadm getled -m chassis
<module> <LED state>
server-10 Not blinking
• racadm getled -m server-1
<module> <LED state>
server-1 ON
• racadm getled -m server-9
<module> <LED state>
server-9 Extension(1)
racadm getled
LED State : Blinking
racadm getled
LED State : Not-Blinking
66 RACADM Subcommand Details