CLI Guide

getniccfg
Table 28. Details of getniccfg attribute
Description
Displays the current and static NIC settings for iDRAC.
Displays the current NIC settings.
Synopsis
racadm getniccfg [-m <module>]
Input
–m <module> must be one of the following values:
• chassis : Default state if -m is not specified.
• server-<n> : where n=1–16
• server-<nx> : where n=1–8; x = a, b, c, d (lower case)
•
switch-<n> : where n=1–6
Output
NOTE:
Table 29. Output
IPv4 settings:
NIC Enabled =1
IPv4 Enabled =1
DHCP Enabled =1
IP Address =10.94.225.165
Subnet Mask =255.255.255.128
Gateway =10.94.225.129
IPv6 settings:
IPv6 Enabled =1
DHCP6 Enabled =0
IP Address 1 =2000:de11:bcd1:fc14:1234:5678:2468:abcd
Gateway =::
Link Local Address =fe80::f21f:afff:fed0:82d6/64
IP Address 2 =::
IP Address 3 =::
IP Address 4 =::
IP Address 5 =::
IP Address 6 =::
IP Address 7 =::
IP Address 8 =::
IP Address 9 =::
IP Address 10 =::
IP Address 11 =::
IP Address 12 =::
IP Address 13 =::
RACADM Subcommand Details 67