CLI Guide

IP Address 14 =::
IP Address 15 =::
LOM Status:
NIC Selection =dedicated
Link Detected =Yes
Speed =1Gb/s
Duplex Mode =Full Duplex
Active NIC =Dedicated
Static IPv4 settings:
Static IP Address =192.168.0.120
Static Subnet Mask =255.255.255.0
Static Gateway =192.168.0.1
Static IPv6 settings:
Static IP Address 1 =2000:de11:bcd1:fc14:1234:5678:2468:abcd/64
Static Prefix Length =64
Static Gateway =::
IPv6 information is displayed only if IPv6 is enabled in iDRAC.
NOTE:
IPv6 Address 1 field indicates static IP and IPv6 Address 2 field indicates dynamic IP.
NOTE: LOM Status is displayed only for iDRAC on Rack and Tower servers and is not displayed for
iDRAC Enterprise on Blade servers.
Example
• Display CMC network settings
racadm getniccfg -m chassis
• Display iDRAC network settings in server slot 1
racadm getniccfg -m server-1
getraclog
Table 30. Details of getraclog attribute
Description
The getraclog command displays RAC log entries.
The getraclog command displays CMC log entries.
Synopsis
• racadm getraclog [-i]
• racadm getraclog [-s <start>] [-c <count>] [--more]
racadm getraclog [-c <count>] [-s <start-record>] [--more]
NOTE: If options are not provided, the entire log is displayed.
Input
• -c — Specifies the number of records to display.
68 RACADM Subcommand Details