CLI Guide

Peak Temperatures
Last Hour = 23C ( 73.4F ) [At Wed, 30 May 2012 11:00:57]
Last Day = 25C ( 77.0F ) [At Tue, 29 May 2012 15:37:23]
Last Week = 27C ( 80.6F ) [At Fri, 25 May 2012 10:38:20]
Last Month = 29C ( 84.2F ) [At Wed, 16 May 2012 15:34:13]
Last Year = 29C ( 84.2F ) [At Wed, 16 May 2012 15:34:13]
jobqueue
Table 63. Details of jobqueue
Description Enables you to view and delete a job or jobs in the current Job Queue.
NOTE:
• To run this subcommand, you must have the Server control privilege.
• If an unexpected error message is displayed for any operation, ensure you delete
some jobs in the jobqueue and retry the operation.
• Use jobqueue create command after applying a pending device configuration. Else,
you may see a job creation and deletion in the lclog.
• Multi-object Set commands using INI, XML, JSON files do NOT require a jobqueue
create command; jobs will be automatically created by the Set command.
Synopsis
racadm jobqueue view -i<jobid>
racadm jobqueue delete [-i<jobid>][--all]
valid options are -i and --all.
racadm jobqueue create <fqdd> [-r <reboot type> ] [-s <start
time> ] [-e <expiry time>]
racadm jobqueue create <fqdd> [-r <reboot type>] [-s <start time>]
[-e <expiration time>] [--realtime]
Input
• -i—Specifies a job ID that is displayed or deleted.
NOTE: The value JID_CLEARALL forces delete all the possible jobs in the queue.
• --all—The job IDs that are not applicable are deleted.
• -fqdd—Specifies an FQDD for which a job should be created.
•
—r <reboot type>—Specifies a reboot type.
•
none—No Reboot Job. This option is the default value.
• pwrcycle—Power cycle.
• graceful—Graceful Reboot without forced shutdown.
• forced —Graceful Reboot with forced shutdown.
• start time—Specifies a start time for job scheduled in the yyyymmddhhmmss format.
TIME_NOW means immediate. Next Reboot means job is in scheduled state until the next
manual restart.
• expiry time—Specifies expiry time for the job execution in the yyyymmddhhmmss format.
The job must start by this time. TIME_NA means expiry time is not applicable.
• --realtime—Specifies the real time job.
NOTE:
• --realtime is applicable for storage configuration commands run on systems
with PERC 9 cards with firmware version 9.1 and later.
• -r option is not valid for real time configuration.
RACADM Subcommand Details 87