CLI Guide

User Configuration
Administrator
Configure User
Clear Logs Administrator Logs
Chassis Control
Administrator
System Control
Server Administrator System Control
Test Alert User System Operations
Debug Command
Administrator
Debug
Fabric x Administrator
(where x is A, B, or C)
System Control
The user privilege in the Remote RACADM proxy for
CMC maps to iDRAC privilege.
• When CMC is not placed on the network, the import,
export, and file operation commands to CIFS, NFS, or
FTP will fail.
• When the Remote or Local RACADM Proxy operation
is in progress, if the iDRAC is reset, then the Proxy
operation fails and the output is not displayed in
Remote or Local RACADM.
• When racadm
getsystem.ChassisControl.ChassisManagemen
tMonitoring attribute is set to monitor, all the
users including root users can only view the attribute.
To configure, set the attribute to monitor and
manage in CMC.
Input
• -u — Specifies the user name of the remote share that stores
the catalog file.
• -p — Specifies the password of the remote share that stores
the catalog file.
• -r — Specifies the iDRAC IP address connected to CMC.
Example
Local RACADM
racadm getractime --proxy
Remote RACADM
racadm getractime -u root -p xxx -r
192.168.0 getractime --proxy
racdump
Table 73. Details of racdump attribute
Description Provides a single command to get dump, status, and general iDRACCMC board information.
This subcommand displays the comprehensive chassis status, configuration state information, and historic event
logs. Used for post deployment configuration verification and during debugging sessions.
RACADM Subcommand Details 97