CLI Guide
To run this subcommand, you must have the Administrator privilege.
To run this subcommand, you must have the Debug permission.
Racdump includes the following subsystems and aggregates the following RACADM commands:
• General System/RAC Information
• Coredump Information
• Network Interface Statistics
• Session Information
• Process Information
• RAC Firmware Build Log
• General System/RAC information — getsysinfo
• Session information — getssinfo
• Sensor information — getsensorinfo
• Switches information (IO Module) — getioinfo
• Mezzanine card information (Daughter card) — getdcinfo
• All modules information — getmodinfo
• Power budget information — getpbinfo
• KVM information — getkvminfo
• NIC information (CMC module) — getniccfg
• Redundancy information — getredundancymode
• Trace log information — gettracelog
• RAC event log — getraclog
• System event log — getsel
Synopsis
racadm racdump
racadm racdump
Input N/A
Output
The following information is displayed when this subcommand is processed:
• General system or RAC information
• Coredump
• Session information
• Process information
• Firmware build information
Example
===============================================================================
General System/RAC Information
===============================================================================
RAC Information:
RAC Date/Time = Thu Jul 3 13:35:32 2014
Firmware Version = 2.05.05.05
Firmware Build = 12
Last Firmware Update = 07/02/2014 19:41:38
Hardware Version = 0.01
MAC Address = 18:03:73:F7:B7:CA
Common settings:
Register DNS RAC Name = 0
DNS RAC Name = idrac
Current DNS Domain =
Domain Name from DHCP = Disabled
IPv4 settings:
Enabled = 1
98
RACADM Subcommand Details