Users Guide

Viewing server certificate using RACADM
To view the SSL server certificate, use the sslcertview command. For more information, see the iDRAC8
RACADM Command Line Interface Reference Guide available at dell.com/idracmanuals.
Uploading custom signing certificate
You can upload a custom signing certificate to sign the SSL certificate. SHA-2 certificates are also
supported.
Uploading custom signing certificate using web interface
To upload the custom signing certificate using iDRAC web interface:
1. Go to Overview → iDRAC Settings → Network → SSL.
The SSL page is displayed.
2. Under Custom SSL Certificate Signing Certificate, select Upload Custom SSL Certificate Signing
Certificate and click Next.
The Upload Custom SSL Certificate Signing Certificate page is displayed.
3. Click Browse and select the custom SSL certificate signing certificate file.
Only Public-Key Cryptography Standards #12 (PKCS #12) compliant certificate is supported.
4. If the certificate is password protected, in the PKCS#12 Password field, enter the password.
5. Click Apply.
The certificate is uploaded to iDRAC.
6. A pop-up message is displayed asking you to reset iDRAC immediately or at a later time. Click Reset
iDRAC or Reset iDRAC Later as required.
After iDRAC resets, the new certificate is applied. The iDRAC is not available for a few minutes during
the reset.
NOTE: You must reset iDRAC to apply the new certificate. Until iDRAC is reset, the existing
certificate is active.
Uploading custom SSL certificate signing certificate using RACADM
To upload the custom SSL certificate signing certificate using RACADM, use the sslcertupload
subcommand, and then use the racreset command to reset iDRAC. For more information, see the iDRAC
RACADM Command Line Reference Guide
available at www.dell.com/esmmanuals.
Downloading custom SSL certificate signing certificate
You can download the custom signing certificate using iDRAC Web interface or RACADM.
Downloading custom signing certificate
To download the custom signing certificate using iDRAC Web interface:
1. Go to Overview → iDRAC Settings → Network → SSL.
The SSL page is displayed.
2. Under Custom SSL Certificate Signing Certificate, select Download Custom SSL Certificate Signing
Certificate and click Next.
A pop-up message is displayed that allows you to save the custom signing certificate to a location of
your choice.
108