Users Guide

# comment, the rest of this line is ignored
cfgNicGateway=10.35.9.1
The command racadm config -f myfile.cfg parses the file and identifies any errors by line
number. A correct file updates the proper entries. Additionally, you can use the same getconfig
command from the previous example to confirm the update.
Use this file to download company-wide changes or to configure new systems over the network.
NOTE: "Anchor" is an internal term and do not use it in the file.
Disabling access to modify iDRAC configuration settings
on host system
You can disable access to modify the iDRAC configuration settings through Local RACADM or iDRAC
Settings utility. However, you can view these configuration settings. To do this:
1. In iDRAC Web interface, go to Overview → iDRAC Settings → Network → Services.
2. Select one or both of the following:
• Disable the iDRAC Local Configuration using iDRAC Settings — Disables access to modify the
configuration settings in iDRAC Settings utility.
• Disable the iDRAC Local Configuration using RACADM — Disables access to modify the
configuration settings in Local RACADM.
3. Click Apply.
NOTE: If access is disabled, you cannot use Server Administrator or IPMITool to perform iDRAC
configurations. However, you can use IPMI Over LAN.
113