Users Guide

• RAID controller
• Batteries
• CPUs
• DIMMs
• HDDs
• Backplanes
• Network Interface Cards (integrated and embedded)
• Video card
• SD card
• Power Supply Units (PSUs)
• Fans
• Fibre Channel HBAs
• USB
• NVMe PCIe SSD devices
The Firmware Inventory section displays the firmware version for the following components:
• BIOS
• Lifecycle Controller
• iDRAC
• OS driver pack
• 32-bit diagnostics
• System CPLD
• PERC controllers
• Batteries
• Physical disks
• Power supply
• NIC
• Fibre Channel
• Backplane
• Enclosure
• PCIe SSDs
NOTE: Software inventory displays only the last 4 bytes of the firmware version. For example, if the
firmware version is FLVDL06, the firmware inventory displays DL06.
NOTE: On the Dell PowerEdge FX2/FX2s servers, the naming convention of the CMC version
displayed in the iDRAC GUI differs from the version displayed on the CMC GUI. However, the
version remains the same.
When you replace any hardware component or update the firmware versions, make sure to enable and
run the Collect System Inventory on Reboot (CSIOR) option to collect the system inventory on reboot.
After a few minutes, log in to iDRAC, and navigate to the System Inventory page to view the details. It
may take up to 5 minutes for the information to be available depending on the hardware installed on the
server.
NOTE: CSIOR option is enabled by default.
115