Users Guide

For more information about the options, see the iDRAC Online Help.
3. Click Apply to apply the settings.
You are prompted for a Smart Card login during any subsequent logon attempts using the iDRAC
web interface.
Enabling or disabling smart card login using RACADM
To enable smart card login, use one of the following:
• Use the objects in the cfgSmartCard group with the config command.
• Use the objects in the iDRAC.SmartCard group with the set command.
For more information, see the iDRAC8 RACADM Command Line Interface Reference Guide available at
dell.com/idracmanuals.
Enabling or disabling smart card login using iDRAC settings utility
To enable or disable the Smart Card logon feature:
1. In the iDRAC Settings utility, go to Smart Card.
The iDRAC Settings Smart Card page is displayed.
2. Select Enabled to enable smart card logon. Else, select Disabled. For more information about the
options, see iDRAC Settings Utility Online Help.
3. Click Back, click Finish, and then click Yes.
The smart card logon feature is enabled or disabled based on the selection.
176