Users Guide

NOTE: Lifecycle logs for Personality Mode change is generated only during the Warm Boot of the
host.
Related Links
Filtering Lifecycle logs
Exporting Lifecycle Controller logs using web interface
Adding comments to Lifecycle logs
Viewing Lifecycle log using web interface
To view the Lifecycle Logs, click Overview → Server → Logs → Lifecycle Log. The Lifecycle Log page is
displayed. For more information about the options, see the
iDRAC Online Help.
Filtering Lifecycle logs
You can filter logs based on category, severity, keyword, or date range.
To filter the lifecycle logs:
1. In the Lifecycle Log page, under the Log Filter section, do any or all of the following:
• Select the Log Type from the drop-down list.
• Select the severity level from the Severity drop-down list.
• Enter a keyword.
• Specify the date range.
2. Click Apply.
The filtered log entries are displayed in Log Results.
Adding comments to Lifecycle logs
To add comments to the Lifecycle logs:
1. In the Lifecycle Log page, click the + icon for the required log entry.
The Message ID details are displayed.
2. Enter the comments for the log entry in the Comment box.
The comments are displayed in the Comment box.
Viewing Lifecycle log using RACADM
To view Lifecycle logs, use the lclog command. For more information, see the iDRAC8 RACADM
Command Line Interface Reference Guide
available at ddell.com/idracmanuals.
Exporting Lifecycle Controller logs
You can export the entire Lifecycle Controller log (active and archived entries) in a single zipped XML file
to a network share or to the local system. The zipped XML file extension is .xml.gz. The file entries are
ordered sequentially based on their sequence numbers, ordered from the lowest sequence number to
the highest.
192