Users Guide

The output is:
BackplaneCurrentMode=UnifiedMode
2. Run the following command to view the requested mode:
get storage.enclosure.1.backplanerequestedmode
The output is:
BackplaneRequestedMode=None
3. Run the following command to set the requested backplane mode to split mode:
set storage.enclosure.1.backplanerequestedmode "splitmode"
The successful message is displayed.
4. Run the following command to verify if the backplanerequestedmode attribute is set to split
mode:
get storage.enclosure.1.backplanerequestedmode
The output is:
BackplaneRequestedMode=None (Pending=SplitMode)
5. Run storage get controllers command and note down the controller instance ID.
6. Run the following command to create a job:
jobqueue create <controller instance ID> -s TIME_NOW --realtime
A job ID is returned.
7. Run the following command to query the job status:
jobqueue view -i JID_xxxxxxxx
where, JID_xxxxxxxx is the job ID from step 6.
The status is displayed as Pending.
Continue to query the job ID until you view the Completed status (this process may take up to three
minutes).
8. Run the following command to view the backplanerequestedmode attribute value:
get storage.enclosure.1.backplanerequestedmode
The output is:
BackplaneRequestedMode=SplitMode
9. Run the following command to cold reboot the server:
serveraction powercycle
10. After the system completes POST and CSIOR, type the following command to verify the
backplanerequestedmode:
get storage.enclosure.1.backplanerequestedmode
The output is:
BackplaneRequestedMode=None
11. Run the following to verify is the backplane mode is set to split mode:
get storage.enclosure.1.backplanecurrentmode
The output is:
BackplaneCurrentMode=SplitMode
254