Users Guide

Viewing vFlash SD card properties
After vFlash functionality is enabled, you can view the SD card properties using iDRAC Web interface or
RACADM.
Viewing vFlash SD card properties using web interface
To view the vFlash SD card properties, in the iDRAC Web interface, go to Overview → Server → vFlash.
The
SD Card Properties page is displayed. For information about the displayed properties, see the iDRAC
Online Help.
Viewing vFlash SD card properties using RACADM
To view the vFlash SD card properties using RACADM, use one of the following:
• Use the cfgvFlashSD object with the getconfig command. The following read-only properties are
displayed:
– cfgVFlashSDSize
– cfgVFlashSDLicensed
– cfgVFlashSDAvailableSize
– cfgVFlashSDHealth
– cfgVFlashSDEnable
– cfgVFlashSDWriteProtect
– cfgVFlashSDInitialized
• Use the following objects with the get command:
– iDRAC.vflashsd.AvailableSize
– iDRAC.vflashsd.Health
– iDRAC.vflashsd.Licensed
– iDRAC.vflashsd.Size
– iDRAC.vflashsd.WriteProtect
For more information about these objects, see the iDRAC8 RACADM Command Line Interface Reference
Guide available at dell.com/idracmanuals.
Viewing vFlash SD card properties using iDRAC settings utility
To view the vFlash SD card properties, in the iDRAC Settings Utility, go to Media and USB Port Settings.
The Media and USB Port Settings page displays the properties. For information about the displayed
properties, see the iDRAC Settings Utility Online Help.
Enabling or disabling vFlash functionality
You must enable the vFlash functionality to perform partition management.
Enabling or disabling vFlash functionality using web interface
To enable or disable the vFlash functionality:
1. In the iDRAC web interface, go to Overview → Server → vFlash.
The SD Card Properties page is displayed.
2. Select or clear the vFLASH Enabled option to enable or disable the vFlash functionality. If any vFlash
partition is attached, you cannot disable vFlash and an error message is displayed.
290