Users Guide

Port Number Function
When VNC feature is enabled, the port 5901 opens.
* Configurable port
The following table lists the ports that iDRAC uses as a client.
Table 4. Ports iDRAC uses as client
Port Number Function
25* SMTP
53 DNS
68 DHCP-assigned IP address
69 TFTP
162* SNMP trap
445 Common Internet File System (CIFS)
636 LDAP Over SSL (LDAPS)
2049 Network File System (NFS)
123 Network Time Protocol (NTP)
3269 LDAPS for global catalog (GC)
* Configurable port
Other documents you may need
In addition to this guide, the following documents available on the Dell Support website at dell.com/
support/manuals provide additional information about the setup and operation of iDRAC in your system.
• The iDRAC Online Help provides detailed information about the fields available on the iDRAC web
interface and the descriptions for the same. You can access the online help after you install iDRAC.
• The iDRAC8 RACADM Command Line Interface Reference Guide provides information about the
RACADM sub-commands, supported interfaces, and iDRAC property database groups and object
definitions.
• The iDRAC RACADM Support Matrix provides the list of sub commands and objects that are applicable
for a particular iDRAC version.
• The Systems Management Overview Guide provides brief information about the various software
available to perform systems management tasks.
• The Dell Lifecycle Controller Graphical User Interface For 12th and 13th Generation Dell PowerEdge
Servers User’s Guide provides information on using Lifecycle Controller Graphical User Interface
(GUI).
• The Dell Lifecycle Controller Remote Services For 12th and 13th Generation Dell PowerEdge Servers
Quick Start Guide provides an overview of the Remote Services capabilities, information on getting
33