Users Guide

If the domain is not specified in the user name, select the Active Directory domain from the Domain

drop-down menu.

5. For an LDAP user, in the Username and Password fields, enter your LDAP user name and password.

Domain name is not required for LDAP login. By default, This iDRAC is selected in the drop-down

menu.

6. Click Submit. You are logged in to iDRAC with the required user privileges.

If you log in with Configure Users privileges and the default account credentials, and if the default

password warning feature is enabled, the Default Password Warning page is displayed allowing you

to easily change the password.

Related Links

Logging in to iDRAC as a local user using a smart card

Logging in to iDRAC as an Active Directory user using a smart card

Logging in to iDRAC as a local user using a smart card

Before you log in as a local user using Smart Card, make sure to:

• Upload user smart card certificate and the trusted Certificate Authority (CA) certificate to iDRAC

• Enable smart card logon.

The iDRAC web interface displays the smart card logon page for users who are configured to use the

smart card.

NOTE: Depending on the browser settings, you are prompted to download and install the smart

card reader ActiveX plug-in when using this feature for the first time.

To log in to iDRAC as a local user using smart card:

1. Access the iDRAC web interface using the link https://[IP address].

The iDRAC Login page is displayed prompting you to insert the smart card.

NOTE: If the default HTTPS port number (port 443) has been changed, type: https://[IP

address]:[port number] where, [IP address] is the IP address for the iDRAC and

[port number] is the HTTPS port number.

2. Insert the Smart Card into the reader and click Login.

A prompt is displayed for the Smart Card’s PIN. A password in not required.