Users Guide

• Fan Speed Offset

• Minimum Fan Speed

For information about the fields, see the Modifying thermal settings using web interface.

The settings are persistent, which means that once they are set and applied, they do not

automatically change to the default setting during system reboot, power cycling, iDRAC, or BIOS

updates. A few Dell servers may or may not support some or all of these custom user cooling

options. If the options are not supported, they are not displayed or you cannot provide a custom

value.

3. Click Back, click Finish, and then click Yes.

The thermal settings are configured.

Configuring supported web browsers

iDRAC is supported on Internet Explorer, Mozilla Firefox, Google Chrome, and Safari Web browsers. For

information about the versions, see the Release Notes available at dell.com/idracmanuals.

If you are connecting to iDRAC Web interface from a management station that connects to the Internet

through a proxy server, you must configure the Web browser to access the Internet from through this

server. This section provides information to configure Internet Explorer.

To configure the Internet Explorer Web browser:

1. Set IE to Run As Administrator.

2. In the Web browser, go to Tools → Internet Options → Security → Local Network.

3. Click Custom Level, select Medium-Low, and click Reset. Click OK to confirm. Click Custom Level

to open the dialog.

4. Scroll down to the section labeled ActiveX controls and plug-ins and set the following:

NOTE: The settings in the Medium-Low state depend on the IE version.

• Automatic prompting for ActiveX controls: Enable

• Binary and script behaviors: Enable

• Download signed ActiveX controls: Prompt

• Initialize and script ActiveX controls not marked as safe: Prompt

• Run ActiveX controls and plug-ins: Enable

• Script ActiveX controls marked safe for scripting: Enable

Under Downloads:

• Automatic prompting for file downloads: Enable

• File download: Enable

• Font download: Enable

Under Miscellaneous:

• Allow META-REFRESH: Enable

• Allow scripting of Internet Explorer Web browser control: Enable

• Allow script-initiated windows without size or position constraints: Enable

• Do not prompt for client certificate selection when no certificates or only one certificate exists:

Enable