User guide

Back to Contents Page
TechnicalSpecifications:Dell™PowerVault™122TDLTVS80AutoloaderUser's
Guide
Physical Specifications
Autoloader Specifications
Autoloader Environmental Specifications
Tape Drive Specifications

Physical Specifications

Autoloader Specifications

Autoloader Environmental Specifications

Tape Drive Specifications
DLT VS80 Drive Specifications
Characteristic
Product Alone
Packaged
Height
8.4 cm (3.34 in)
20.5 cm (8.0 in)
Width
41.9 cm (16.5 in)
60 cm (23.6 in)
Depth
60.9 cm (24 in) (Approximately 65 cm (25.6 in) with Bar Code Reader)
74.3 cm (29.2 in)
Weight
10 kg (22 lb)
11.35 kg (24.9 lb)
Characteristic

Specification
Maximum storage capacity

Native: 320 GB
Compressed: 640 GB (assuming 2:1 compression ratio)
Maximum data transfer rate
Native: 3 MB/s
Compressed: 6 MB/s (assuming 2:1 compression ratio)
Drive type
1 DLT VS80 drive
Number of slots
8
MSBF
250,000 hours
Interface
LVD ultra wide SCSI-2, 16 bits wide, 68-pin HD connector
Characteristic

Specification
Temperature/humidity
Operating

10º to 40ºC (Web bulb temp, 32ºC max)
Non-operating
–40º to 65ºC (Web bulb temp, 40ºC max)
Recommended operating temperature
20º to 30ºC (Web bulb temp, 30ºC max)
Temperature shock immunity - maximum rate of change
10ºC per hour
Humidity
Operating
20% to 80% RH non-condensing
Non-operating
10% to 95% RH non-condensing
Altitude
Operating
0 to 4000 m
Non-operating
0 to 9144 m
Vibration (5–500 Hz)
Maximum acceleration to operating
0.25g RMS (random)
Frequency range
500 Hz
Description

DLT1 (VS80)
Read/writetransferrate:maximumsustained(DLTtape™IVmedia)

Non-compressed mode: 3.0 MB/s
Compressed (2:1 typical): 6.0 MB/s
Burst transfer rate
20 MB/s
Average access time
68 seconds
Loading time to BOT
(for previously written tape)
59 seconds (average)
Unloading time from BOT
17 seconds (average)
MTBF
>200,000 hours
Interface type
Low-Voltage Differential (LVD) Ultra 2 SCSI