User guide

4 Upgrading Tape Drive Modules
www.dell.com | support.dell.com
Figure 2-1. Removing the Drive Module Cover Plate
9
Reconnect the tape library and the host system to an electrical outlet.
10 Turn on the tape library.
An error message may appear on the LCD that reads Drive Error or Drive
Offline. This behavior is normal until the tape library firmware has been updated.
11 When the tape library is turned on and online, turn on the host system.
12 Update the firmware. See "Updating the Tape Library Firmware."
Figure 2-2. Inserting the Drive Module